Welcome to FyreRok Well Insights, where we take some time to discuss well testing, petroleum engineering and everything else downhole-related, for the betterment of the entire oil and gas industry. We hope that you will find these topics insightful and beneficial.

You can receive Well Insights updates directly to your inbox. Click here to subscribe.

IMG_1668.jpg

An Introduction To Well Testing

Well testing is the science of simultaneously measuring a well’s flowrate and corresponding pressure response, to determine well and reservoir parameters…

Horner Plot.png

An Overview Of Skin Factor

Skin factor is a parameter in the Darcy Flow Equation, and it exists to account for the difference in theoretical flowrate versus the actual observed flowrate, for a given pressure drop…

Skin Due To Damage

The most common cause of skin in a well is due to damage to the formation near the wellbore…

Spp.png

Skin Due To Partial Penetration

A common cause of skin in a well is due to partial penetration…

Laminar Vs. Turbulent2.png

Skin Due To Turbulence

One of the causes of skin in a gas well is due to turbulence near the wellbore…

DFIT.png

5 Things To Consider When Planning a DFIT

Are you thinking about running a DFIT? Here are 5 things to consider as you plan you test…

Shale Fractures.gif

Fracture Tip Extension

Why do shale reservoirs tend to produce such unusual G-function plots? A little phenomenon known as “fracture tip extension” has something to do with it…

Radius Of Investigation

Radius of investigation is a term often used in well testing, referring to how far into the reservoir a pressure transient has traveled…

Water droplet.jpg

Critical Rate and Liquid Loading

Liquid loading occurs when the velocity of the gas fall below the terminal velocity of the liquid droplets…

How To Run A Deliverability Test

A deliverability test is a simple type of well test that is used to determine a well’s production potential or “deliverability”…

How To Run A Buildup Test

A buildup test is a common type of well test, which includes pressure transient analysis, and it is used to determine some critical well and reservoir parameters…

How To Run A Pressure Gradient Survey

A pressure gradient survey is a simple type of well test that is designed to answer questions about the fluid in a well…

Introduction To Interference Testing

An interference test is a type of pressure transient test that measures the connectivity between two or more wells in the same reservoir…

Primary Pressure Derivative

Being able to accurately identify wellbore-related effects is critical for an accurate well test analysis...

12 Rules For Well Testing

Here are 12 rules for well testing that will help lead you to the best possible analysis…

5 Things To Consider When Plugging A Well

Here are 5 things you should consider if you are planning a P&A project…

Testing Horizontal Wells

The flow geometries in horizontal wells are similar to vertical wells, but with some nuanced differences…